Over the last years LINAK has developed the following accessories due to customer needs:
- Electronic limit switches
- LS / LSD limit switches
- Potentiometer and optical encoder
- Safety limit switch
- Extension cables
- Mains cut-off
Electronic limit switches
The CS16 is connected between a LINAK actuator and a non-LINAK power supply where it trips out the current to the actuator in the end position or if an obstacle is encountered. The CS28 / 32 are electronic limit switches integrated into the LA28 and the LA32.
LS / LSD limit switches
There are two types of limit switches: LS and LSD.
LS gives the signal in two fixed end positions. The control unit stops the actuator when the micro switches are activated.
LSD controls the stroke length of the actuator between two fixed end positions by cutting off the current to the motor.
Potentiometer and optical encoder
The potentiometer is used where the absolute position of the actuator is needed. The optical encoder is used for positioning and servo control of an actuator.
Safety limit switch (SLS)
The SLS cuts off the current to the actuator immediately after pushing the button. It is fitted on a cable between the actuator and the control box. The SLS can, for example, be used in a bed frame.
Extension cables
LINAK has a range of extension cables and T-cables for handsets, desk panels and foot switches. LINAK also offers a range of extension cables for actuators.
Mains cut-off
LINAK offers a new mains cut-off series for use in conjunction with the CB9 / CBD. The mains cut-off disconnects the mains voltage so that there is no mains voltage in the CB and the mains cable when not in operation.
For further information on accessories, please see the specific technical documentation.
