The following accessories can be used in various applications. For further technical information on the different products, please click on the product pictures below.
BA18
The BA18 has been developed for use with the control boxes: CB18, CB14, CB12 and CB9. BA18 has a capacity of 1.2 Ah at 24 V DC.
Data sheet
|
BAJ
The BAJ battery pack has been specially developed for use with the JUMBO system. The battery pack is easy to exchange through an integrated snap system.
Data sheet
|
CH01
For charging the batteries of CB08-XA and all JUMBO™ boxes directly connected to the control box or via the handset HB40A. With interchangeable plug types, optimising logistics.
Data sheet
|
CH8
For charging of the batteries in the control box CB8-XA, directly connected to the control box or via the handset HB40A.
Data sheet
|
|
|
CHJ2
The CHJ2 charger has been specially designed for use as a wall-charger for the JUMBO system.
Data sheet
|
CS16
Electronic Limit Switches.
For industry actuators.
Data sheet
|
|
DJB
The DIN Junction Box is designed for use where there is a need for more than 1 or 2 controls to be connected to a control box.
Data sheet
|
Extension cables
LINAK has a range of extension cables and T-cables for handsets, desk panels and foot switches. LINAK also offers a range of extension cables for actuators.
No data sheet available.
|
LS/LSD
Limit Switches LS/LSD. For industry actuators.
Data sheet
|
Mains cut-off
The mains cut-off disconnects the mains voltage so that there is no mains voltage in the CB and mains cable when not in operation.
Data sheet
|
MBJ
Mounting brackets for the JUMBO system.
Data sheet
|
Optical encoder 
The optical encoder is used for positioning and servo control of an actuator.
No data sheet available.
|
Potentiometer
The potentiometer is used where the absolute position of the actuator is needed.
No data sheet available.
|
MJB
The MJB Modular Junction Box is designed for use together with the CB20 and other OPENBUS™ control boxes. The MJB makes it possible to connect handsets, attendant controls and accessories with the CB20.
Datasheet
|
SLS
Safety Limit Switch SLS. The SLS cuts off the current from the motor in either out- or inwards direction. Can also be used as signal switch. The SLS is available in protection class up to IP66 washable.
For all LINAK® actuators.
Data sheet
|
TR6
The TR6 is a seperate external power supply box, which can be wall mounted or placed on the floor.
- Input 230V - output 24V AC.
Data sheet
|
TR7
The TR7 is a separate external power supply box, which can be wall mounted or placed on the floor moulding next to the mains.
Data sheet
|
|
